Mirage 2000 Bedienungsanleitung PDF herunterladen (Seite 32)

Fuel tank

Fuel tank is held between 2 plywood frames

Rear frame should be glued in the fuselage between the 2 inlet ductings

Connect the fuel tank to the clunk as the photo.

Check that there is no leak before to fit it in

fuselage.

Drill a 3 mm hole in the bottom of the fuselage

for the fuel vent

The fuel tank is connected to the UAT catch tank

to be sure that there is no bubble in the fuel line.

The tubing from the main tank to the catch tank

and to the catch tank to the fuel pump must be

gasoline tubing (no silicone tubing). Also for the

air vent tube.

The catch tank is glue with double face tape or with rubber band on

the top of the main tank or on one side.

Hold the fuel tank with rubber bands or silicon glue

Fuel vent

1 2 ... 27 28 29 30 31 32 33 34

Keine Kommentare

Mirage 2000 Bedienungsanleitung Seite 32