Mirage OASIS Bedienungshandbuch PDF herunterladen (Seite 14)

Is my boat recyclable?

Yes, Hobie will recycle your boat when you are done with

it. To recycle a Hobie Kayak, it must be cut up so it fits in a

box with the following dimensions (for UPS): may not exceed

130” length plus girth, and 108” in height. Ship the boat to:

Frequently Asked Questions

How can I replace the screw-in fittings (if equipped)?

You may find it necessary to replace some of the padeyes

or hooks if they are damaged. To replace them, follow the

instructions below.

1. Drill two 3/16” holes opposite one

another on the top surface of the screw-

in fitting. Be careful not to go all the way

through the part and into the kayak.

2. Insert the two prongs of a pair of

needle nose pliers into the two holes

and rotate the part counterclockwise.

3. Grip the new part with your pliers

and install it into the hole. Be sure to

put a little pressure into the hole so that

the threads on the new part install in

properly.

Hobie Cat Company

4925 Oceanside Blvd.

Oceanside, CA 92056

It is our hope that no Hobie Kayak will ever end up in

a landfill!

Is my boat repairable?

Hobie kayaks are very durable; however, on occasion they

may need some minor repairs. Linear polyethylene is repair-

able. Check with your dealer concerning repairs for your

kayak.

What is the best way to use the scupper plugs?

The scupper plugs are useful when

you would like to keep the inside of

your boat dry and is most helpful

in calmer water conditions. Simply

press the plug firmly into the scupper

hole from the top side of the boat. To

prevent loss of the plugs, lanyards are

provided with the plugs so that you can

attach them to the boat.

Attach lanyard here

1 2 ... 9 10 11 12 13 14 15 16

Keine Kommentare

Mirage OASIS Bedienungshandbuch Seite 14